* Modellnummer bezeichnet Größe
Laserschneiden von Acryl
Acryl-Laserschneidmaschinen sind extrem schnell, genau, zuverlässig und hygienisch.
Vereinbaren Sie eine Online-DemoAcryl, Plexiglas und ähnliche Kunststoffe werden für viele Anwendungen verwendet und haben in letzter Zeit aufgrund der Coronavirus-Pandemie einen Anstieg der Nachfrage verzeichnet. Dies liegt zum Teil daran, dass es hygienisch und leicht zu reinigen ist.
Einfach ausgedrückt ist Acryl im Vergleich zu anderen Materialien wie Glas und Metall das Material der Wahl geworden, da der Preis, die Verfügbarkeit und die Benutzerfreundlichkeit andere Optionen überwiegen. Im Gegensatz zu anderen Methoden ist das Laserschneiden unkompliziert und außergewöhnlich schnell, benötigt keine Verbrauchsteile und ist äußerst zuverlässig.
Acryl-Laserschneider & Graveure
Unsere CO2-basierten Acryl-Laserschneider und -Gravierer sind in der Regel doppelt so schnell und langlebig wie Konkurrenzprodukte und werden branchenweit eingesetzt und von einigen der größten Anbieter auf dem Markt eingesetzt. Eine Acryl-Laserschneidemaschine kann modular aufgebaut und einfach in jeden bestehenden Herstellungsprozess integriert werden. Für den Betrieb sind nur minimale menschliche Eingriffe erforderlich, sodass eine Maschine ohne Unterbrechung schnell produzieren kann.
Hygiene, Genauigkeit und Geschwindigkeit
Als berührungslose Technologie verursacht das Laserschneiden von Acryl keine sekundäre Beschädigung des zu markierenden Objekts, wodurch perfekt saubere Schnitte oder Markierungen ohne Beschädigung erzeugt werden. Im Vergleich zu herkömmlichen Gravurmethoden ist ein Acryl-Lasergravierer äußerst genau und das Material wird nicht belastet.
Bei unseren ausgereiften Systemen ist Geschwindigkeit eine Selbstverständlichkeit, sodass Sie immer sicher sein können, Ihre Schneid- oder Gravurprodukte pünktlich zu liefern.
Wie es funktioniert
Zum Lasergravieren von Acryl verwenden Sie einen Hochintensitätslaser, um die Temperatur einer unglaublich dünnen Schicht des Kunststoffs zu erhöhen, wodurch dieser schmilzt und eine modifizierte Oberfläche bildet. CO2-Laser mit höherer Intensität können verwendet werden, um die Oberfläche des Kunststoffs zu durchschneiden.
Lasergeschnittene Acrylanwendungen
Acrylplatten sind schlagfest und bruchsicher und somit perfekt für jede Verwendung geeignet. Darüber hinaus ist Acryl leichter und haltbarer als Glas mit transparenten, verspiegelten und farbigen Acryloptionen. Sie sind ideal für Hygienesicherheitsverkleidungen, Rückwände, Schilder, Türen, Fenster, Modelle, Teile, Produkte und vieles mehr. Ein Acryl-Lasergravierer kann den Effekt erzeugen, den Sie auf dem Bild rechts sehen können.
Typen
Lasergeschnittene Acrylplatten sind selbst für die härtesten Kunststofftypen extrem schnell herzustellen. Komplexe Konturen sind für unsere Laserschneidmaschinen kein Problem. Die Kanten von lasergeschnittenem Kunststoff kommen sauber heraus, ohne dass eine Nachbearbeitung erforderlich ist.
Videos & Beispiele
Unten finden Sie Informationen zum Schneiden und Acrylieren von Lasermaschinen bei der Arbeit:
-
Lotus Laser Systems Blu100 and Blu125 CO2 laser cutting PPE health worker visors
https://www.lotuslaser.com/machine/blu100/
https://www.lotuslaser.com/machine/blu125/
During the Covid 19 crisis the demand for PPE in the healthcare system has been unprecedented. Several of our customers have been using Lotus Laser Systems technology to laser cut PPE face visors and in so doing they are helping to protect our health workers as well as, in many cases, earning significant revenues at a time where their businesses would otherwise be on total lock-down.
Lasercut Works (London) is a long-standing Lotus Laser Systems customer having purchased many Lotus CO2 laser cutting plotters, Lotus 1µm laser marking machines and more recently a 200w Lotus Meta-D super high speed DFGL cutting laser.
Over recent weeks Lasercut Works has been making tens of thousands of PPE face visors. Their design is both ergonomic, cost effective, material efficient and simple to use. The visor is cut from 0.5mm polycarbonate and the retaining/adjustment straps are made from 0.75mm polypropylene.
The underside extraction and efficient air assist via the nosecone of all Blu laser cutting machines makes cutting these otherwise difficult materials easy, fast and clean.
Lasercut Works were approached to supply several thousands of visors to a particular health authority in Cornwall and given just 48hrs notice to make the delivery. For weeks now, since the crisis started Lasercut Works has been operating a 24hr shift production schedule but this latest request was too much for them to handle with the Lotus Laser Systems that they have purchased so they approached Lotus Laser Systems to help, which we did; With a confirmed order at 8am Thursday 9th April in less than 24hrs, by 6am on Good Friday 10th April we had worked virtually around the clock to cut, assemble and pack almost 2,000 visors. By that afternoon the visors were delivered to the customer in Cornwall.
See here for more details.
https://www.lotuslaser.com/laser-cutting/using-laser-cutting-machines-to-create-visors-for-the-nhs/
Here at Lotus Laser Systems we have extensive experience in laser marking within a range of industries and applications
For more information on how we can help you please visit our website and get in touch. -
Lotus Laser Systems custom system laser marking blood glucose meters on mini conveyor
https://www.lotuslaser.com/
We have a long history of designing laser marking workstations with customized handling solutions from complex robotics to simple conveyor fed machines.
In this example the customer required a number of semi-automatic laser marking machines to mark a very large quantity of components with the CE mark and a model number. The customer required minimal human involvement with maximum parts per hour and for the finished solution to be as error free as possible
Our Model Meta-C is ideal for these types of solution as the PLC/HMI electronics of Meta-C provide for an almost unlimited amount and type of external devices to connect and interact with the core laser marking system.
To maximize the speed of mark we incorporated an IPG 30w Q-switched fiber laser to Meta-C and for the lowest cost, most flexible and easiest to adapt solution we used the original C1 laser safety Class 2 enclosure with an interlocked, manual access panel for system maintenance only
The budget was restricted so we used a mini-conveyor to queue the parts to a pneumatic clamping mechanism. Sensors activated the clamping mechanism to open and close, holding the part tightly during the marking process and separately to the rest of the queued parts.
After marking the parts are delivered through a hatch into a storage box
The marking time is 1.6 seconds and the positioning/clamping time is 1.4 seconds therefore the total time per part is 4.9 seconds and so each system is capable of producing 734 parts per hour.
Here at Lotus Laser Systems we have extensive experience in laser marking within a range of industries and applications
For more information on how we can help you please visit our website and get in touch.
Please view our full range of machines at https://www.lotuslaser.com/all-machines/ -
Meta CO2 marking cast acrylic
This demonstration shows how fast and smooth Meta CO2 can mark cast acrylic.
With this application not much laser power is required so similar speeds could be achieved with a source outputting much lower power, such as 35w for example
more details at www.lotuslaser.com