* el número de modelo indica el tamaño
Acrílico de corte por láser
Las máquinas de corte por láser de acrílico son extremadamente rápidas, precisas, confiables e higiénicas.
Organice una demostración en líneaEl acrílico, metacrilato y plásticos similares se utilizan para muchas aplicaciones y han tenido un aumento reciente en la demanda debido a la pandemia de coronavirus. Esto se debe en parte a que es de naturaleza higiénica y fácil de limpiar.
En pocas palabras, el acrílico se ha convertido en el material de elección frente a otros materiales como el vidrio y el metal, porque el precio, la disponibilidad y la facilidad de uso superan a otras opciones. En comparación con otros métodos, el corte por láser es sencillo y excepcionalmente rápido, no necesita consumibles y es extremadamente confiable.
Cortadores y grabadores láser de acrílico
Por lo general, con el doble de velocidad y vida útil que los productos de la competencia, nuestros cortadores y grabadores láser acrílicos basados en CO2 se utilizan en toda la industria y algunos de los proveedores más importantes del mercado confían en ellos. Una máquina cortadora láser de acrílico puede ser modular e integrarse fácilmente en cualquier proceso de fabricación existente. Necesitan una mínima intervención humana para funcionar, lo que permite que una máquina produzca a un ritmo rápido sin interrupciones.
Higiene, precisión y rapidez
Como tecnología sin contacto, el acrílico de corte por láser no causa daños secundarios al objeto que se está marcando, produciendo cortes o marcas perfectamente limpias y libres de daños. En comparación con los métodos de grabado tradicionales, un grabador láser acrílico es extremadamente preciso y el material no sufre estrés.
Con nuestros sistemas bien perfeccionados, la velocidad es un hecho, por lo que siempre puede estar seguro de entregar sus productos de corte o grabado a tiempo.
Cómo funciona
Para grabar acrílico con láser, se usa un láser de alta intensidad para elevar la temperatura de una capa increíblemente delgada del plástico, haciendo que se derrita y forme una superficie modificada. Se pueden utilizar láseres de CO2 de mayor intensidad para cortar la superficie del plástico.
Usos de acrílico cortado con láser
Las láminas acrílicas son resistentes a los impactos y a los golpes, lo que las hace perfectas para cualquier uso. Además, como el acrílico es más liviano y duradero que el vidrio con opciones de acrílicos transparentes, espejados y de colores; son ideales para la higiene de paneles de seguridad, salpicaderos, letreros, puertas, ventanas, modelos, repuestos, productos y mucho más. Un grabador láser acrílico puede crear el tipo de efecto que se puede ver en la imagen de la derecha.
Tipos
Las láminas acrílicas cortadas con láser son extremadamente rápidas de fabricar, incluso para los tipos de plástico más resistentes. Los contornos complejos no resultan un problema para nuestras máquinas de corte por láser. Los bordes del plástico cortado con láser salen limpios, sin necesidad de procesamiento posterior.
Vídeos y ejemplos
Consulte las máquinas láser de corte y grabado acrílico en funcionamiento a continuación:
-
Lotus Laser Systems Blu100 and Blu125 CO2 laser cutting PPE health worker visors
https://www.lotuslaser.com/machine/blu100/
https://www.lotuslaser.com/machine/blu125/
During the Covid 19 crisis the demand for PPE in the healthcare system has been unprecedented. Several of our customers have been using Lotus Laser Systems technology to laser cut PPE face visors and in so doing they are helping to protect our health workers as well as, in many cases, earning significant revenues at a time where their businesses would otherwise be on total lock-down.
Lasercut Works (London) is a long-standing Lotus Laser Systems customer having purchased many Lotus CO2 laser cutting plotters, Lotus 1µm laser marking machines and more recently a 200w Lotus Meta-D super high speed DFGL cutting laser.
Over recent weeks Lasercut Works has been making tens of thousands of PPE face visors. Their design is both ergonomic, cost effective, material efficient and simple to use. The visor is cut from 0.5mm polycarbonate and the retaining/adjustment straps are made from 0.75mm polypropylene.
The underside extraction and efficient air assist via the nosecone of all Blu laser cutting machines makes cutting these otherwise difficult materials easy, fast and clean.
Lasercut Works were approached to supply several thousands of visors to a particular health authority in Cornwall and given just 48hrs notice to make the delivery. For weeks now, since the crisis started Lasercut Works has been operating a 24hr shift production schedule but this latest request was too much for them to handle with the Lotus Laser Systems that they have purchased so they approached Lotus Laser Systems to help, which we did; With a confirmed order at 8am Thursday 9th April in less than 24hrs, by 6am on Good Friday 10th April we had worked virtually around the clock to cut, assemble and pack almost 2,000 visors. By that afternoon the visors were delivered to the customer in Cornwall.
See here for more details.
https://www.lotuslaser.com/laser-cutting/using-laser-cutting-machines-to-create-visors-for-the-nhs/
Here at Lotus Laser Systems we have extensive experience in laser marking within a range of industries and applications
For more information on how we can help you please visit our website and get in touch. -
Lotus Laser Systems custom system laser marking blood glucose meters on mini conveyor
https://www.lotuslaser.com/
We have a long history of designing laser marking workstations with customized handling solutions from complex robotics to simple conveyor fed machines.
In this example the customer required a number of semi-automatic laser marking machines to mark a very large quantity of components with the CE mark and a model number. The customer required minimal human involvement with maximum parts per hour and for the finished solution to be as error free as possible
Our Model Meta-C is ideal for these types of solution as the PLC/HMI electronics of Meta-C provide for an almost unlimited amount and type of external devices to connect and interact with the core laser marking system.
To maximize the speed of mark we incorporated an IPG 30w Q-switched fiber laser to Meta-C and for the lowest cost, most flexible and easiest to adapt solution we used the original C1 laser safety Class 2 enclosure with an interlocked, manual access panel for system maintenance only
The budget was restricted so we used a mini-conveyor to queue the parts to a pneumatic clamping mechanism. Sensors activated the clamping mechanism to open and close, holding the part tightly during the marking process and separately to the rest of the queued parts.
After marking the parts are delivered through a hatch into a storage box
The marking time is 1.6 seconds and the positioning/clamping time is 1.4 seconds therefore the total time per part is 4.9 seconds and so each system is capable of producing 734 parts per hour.
Here at Lotus Laser Systems we have extensive experience in laser marking within a range of industries and applications
For more information on how we can help you please visit our website and get in touch.
Please view our full range of machines at https://www.lotuslaser.com/all-machines/ -
Meta CO2 marking cast acrylic
This demonstration shows how fast and smooth Meta CO2 can mark cast acrylic.
With this application not much laser power is required so similar speeds could be achieved with a source outputting much lower power, such as 35w for example
more details at www.lotuslaser.com